48
Figure 2-61 IEEE802
Step 2
Select
On
to enable IEEE802, and then configure parameters.
Table 2-24 IEEE802 parameters description
Parameter
Description
Authentication
●
PEAP
: Ordinarily uses TLS only to authenticate the server to the client,
and only the sever is required to have a public key certificate.
●
EAP-TLS
: Provides mutual authentication of client to server, and
server to client. Both the client, and the server must be assigned a
digital certificate signed by a CA (Certificate Authority) that they both
trust.
CA Certificate
Select
CA Certificate
checkbox, and then click
Browse
to import the CA
certificate to verify whether the switch is valid.
PEAP
Username
For PEAP method, user authentication is performed by using
password-based credentials (username, and password).
Password
EAP-TLS
Client Certificate
Click
Browse
to import the client certificate, and private key files for
authentication.
Private Key
Step 3
Click
Confirm
.
2.5.3.9 Configuring PPPoE
●
The device is connected to public network.
●
The username and password of PPPoE are provided.
●
Disable UPnP when using PPPoE.
●
You cannot change device IP on web client after connected through PPPoE.
Connect to the network through PPPoE, and the device can automatically obtain a dynamic IP on
public network.
Step 1
Select
Setting
>
Network
>
PPPoE
.
