30
When there are two ports, serial port push protocol is unavailable for port 1.
Figure 2-40 Serial port push
Table 2-13 Serial port push parameter description
Parameter
Description
Fast
Configuration
Field Name
●
Select fields to send to the third serial collection
device.
●
Select the checkbox next to
Field Name
to select
all the fields.
Hover over the fields, you can see the explanations.
Format
Format of the fields.
Common Config
Fields selected by default.
Up/Down
Click to move the field position up or down.
General Config
Tag Head
The tag head of data package. It is
aabb
by default.
Tag Tail
The tag tail of data package. It is
aa55
by default.
Encode Type
Select encode type from
UTF-8
(default) and
GB2312
.
Check Mode
Select check mode from
No Parity
,
CheckSum
and
XOR Check
.
Step 3
Click
Confirm
.
2.5.1.8 Configuring RS-485 External
You can view the status of external devices connected to the Camera through RS-485. Certain
configurations of external illuminators are also available.
Step 1
Select
Setting
>
ITC
>
RS485 External
.
Step 2
Select
Status of Connected Devices
, and you can see the detailed information of devices
connected to the Camera.
Click
Refresh
can update the current status of external devices.
Step 3
Select
External Light (RS-485)
to set the continuous light.
