Deployment Manual
42
6.2.3 (Optional) Enabling Fahrenheit
If you use Fahrenheit, you need to enable Fahrenheit both on the face recognition terminal and
the NVR.
For how to enable Fahrenheit on the face recognition terminal, see "6.1.3 Configuring Face
Step 1 Log in to the local interface of NVR.
Step 2 On the
Display
interface, select
°F
from the drop-down list of
Temperature Unit
.
Figure 6-13 Set Fahrenheit
Step 3 Click
Apply
.
6.2.4 Commissioning
Preparation
Face recognition terminal is correctly installed and connected.
Unlock mode, face database, face recognition parameters are correctly configured on the
face recognition terminal.
Face recognition terminal is added to NVR.
Temperature and mask monitoring are enabled on NVR.
