Deployment Manual
32
Insert the USB disk that has the first face database into another face recognition
terminal, and then perform the following steps to import the database.
1) On the local interface, tap
>
to log in.
2) Tap USB > USB Import.
Figure 6-5 USB Import
3) Tap
Face Feature Value
, and then tap
OK
.
Face images in the USB disk will be imported into the terminal.
6.1.3 Configuring Face Recognition Parameters
Set basic face recognition parameters, and enable temperature monitoring and mask detection.
Step 1 On the local interface of the face recognition terminal, tap
>
to log in.
Step 2 Tap
System > Face Parameter
.
