Deployment Manual
60
1) Log in to the web interface of the face recognition terminal, and then select
Network Setting > P2P
.
2) Select
Enable
to enable P2P function.
3) Click
OK
.
Step 3 Enter device name, device password, and save settings.
Figure 6-37 Add face recognition terminal (SN/scan)
6.4.1.2 Adding by IP/Domain
You can add devices by entering IP of the device or specific domain. This section takes
entering device IP as an example.
Step 1 On the
Home
interface, tap
, and then select
IP/Domain
.
Step 2 Select the device type.
Step 3 Enter information as needed, and then save settings.
Figure 6-38 Add face recognition terminal (IP/domain)
6.4.1.3 Adding by Search
You can search online devices and add them.
Step 1 Tap
at the upper-right corner, and then select
Search online
.
