Deployment Manual
41
6.2.2 Enabling Temperature and Mask Monitoring
Step 1 Log in to NVR, and then select
AI > Parameters > Door Access Control
.
Step 2 Select the camera channel from the
Channel
drop-down list.
Step 3 Click
Temp.Not within Thresholds
or
Mask Warning
.
Figure 6-12 Set temperature or mask monitoring
Step 4 Set the following parameters.
Table 6-4 Temperature monitoring parameters
Parameter
Description
Period
Click
Settting
to set the temperature monitoring schedule.
Post-Record
Specify how many seconds you want the device to keep recording after
an event is detected.
Record Channel Select Channel 1 or 2 to record video.
Voice Prompt
Set the voice promt for an temperature alarm.
More Setting
Click
More Setting
, and then you can select the alarm-linked actions,
such as buzzer, alarm upload, and email.
To enable
Send Email
, you need to go to
MANAGEMENT >
NETWORK > EMAIL
and set email parameters in advance.
