Deployment Manual
47
Port
TCP protocol communication provides service port, and keeps it in
accordance with added device.
Organization
Select organization node of added device.
IP Address
When register by IP address or ONVIF mode, set the IP address of added
device.
SN
When register by serial number mode, set the serial number of added
device.
Username
Enter login username and password of added device.
Password
Decode mode
Select according to the decode mode of added device:
Pull
Decoder extracts stream from platform by url address, the decode
mode of device is pull.
Direct
Decoder extracts stream directly from encoder, the decode mode is
direct for device, under this mode; you need to add decoder IP
address when trusted list is added by device.
Push
VMS (Video Management Service) pushes stream directly to decoder,
currently only support NVD without combination screen, the mode is
not supported by matrix, video wall or NVD under combination mode.
Support
Combination
Select when added device supports combination.
Picture Server
Select storage location of picture reported by ANPR.
LED Type
Support added LED including general screen and free parking screen,
select corresponding device type according to the accessed device.
Step 4 Click
Add
.
Click
Continue to add
if necessary, then you can add more devices.
6.3.3 Modifying Channel Number and Features
After adding the terminal to Express, you need to modify the number and features of video
channels under this terminal.
Step 1 Log in to Express Client.
Step 2 On the
Homepage
, click
Device
at the lower-left corner.
Step 3 Select the face recognition terminal from the device tree, and then click
Step 4 On the
Edit Device
interface, click the
Video Channel
tab.
Step 5 Modify the value in the
Channel Number
box from 0 to 1, select
IVS Alarm
from the
Features
drop-down list, and then the video channel of the face recognition terminal is
added to Express.
