Dahua Technology NVR41 Series, User Manual, Page: 300 / 355

Local Basic Operation 288
Table 4-68 Basic service parameters
Parameter Description
Mobile Push
Notifications
After enabling this function, the alarm triggered by the NVR can
be pushed to a mobile phone. This function is enabled by
default.
CGI
If this function is enabled, the remote devices can be added
through the CGI protocol. This function is enable by default.
ONVIF
If this function is enabled, the remote devices can be added
through the ONVIF protocol. This function is enabled by default.
NTP Server
After enabling this function, a NTP server can be used to
synchronize the device. This function is enabled by default.
SSH
After enabling this function, you can use SSH service. This
function is disabled by default.
Private Protocol
Authentication Mode
● Security Mode (Recommended): Uses Digest access
authentication when connecting to NVR.
● Compatible Mode: Select this mode when the client does
not support Digest access authentication.
Step 3 Click Apply to complete the settings.
4.15.2.2 802.1x
The device needs to pass 802.1x certification to enter the LAN.
Step 1 Select
Main Menu
>
SECURITY
>
SYSTEM SERVICE
>
802.1x
.
The 802.1x interface is displayed. See Figure 4-240.
Figure 4-240 802.1x interface
Step 2 Select the Ethernet card you want to certify.
Step 3 Select Enable and configure parameters. See Table 4-69.