Local Basic Operation
97
Parameter
Description
User Name
Enter the user name of the remote device.
Password
Enter the password of the user for the remote device.
Remote Channel
Enter the remote channel number of the remote device that you want
to add.
Decoder Buffer
In the
Decoder Buffer
list, select
Default
,
Realtime
, or
Fluent
.
Protocol Type
If the remote device is added through private protocol, the default
type is
TCP
.
If the remote device is added through Onvif protocol, the system
supports
Auto
,
TCP
,
UDP
, or
MULTICAST
.
If the remote device is added through other manufacturers, the
system supports
TCP
and
UDP
.
Encrypt
If the remote device is added through Onvif protocol, selecting the
Encrypt
check box will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the
remote IP camera.
3) Click
OK
.
The remote device information is displayed on the
Added Device
list.
Step 4 Click
Next
to complete the remote device registration.
Click
to change the remote device information. Click
to delete remote device.
Once the multiple-sensor device has registered to the device system displays the channel status on
the
Link info
. See Figure 4-30. It shows one remote device has occupied two channels: D1, D3.
Figure 4-30
4.1.4.5 RAID Manager
RAID (redundant array of independent disks) is a data storage virtualization technology that
combines multiple physical HDD components into a single logical unit for the purposes of data
redundancy, performance improvement, or both.
RAID function is for some series product only. Slight difference may be found on the user interface.