Local Basic Operation
146
Step 1 On the Expanded PTZ Control Panel, click
.
The
PTZ
interface is displayed.
Step 2 Click the
Tour
tab.
The
Tour
tab is displayed. See Figure 4-86.
Figure 4-86
Step 3 In the
Patrol No
. box, enter the value for the tour route.
Step 4 In the
Preset
box, enter the preset value.
Step 5 Click
Add Preset
.
A preset will be added for this tour.
You can repeat adding more presets.
Click
Del Preset
to delete the preset for this tour. This operation can be repeated
to delete more presets. Some protocols do not support deleting.
4.4.3.3 Configuring Patterns
Step 1 On the Expanded PTZ Control Panel, click
.
The
PTZ
interface is displayed.
Step 2 Click the
Pattern
tab.
The
Pattern
interface is displayed. See Figure 4-87.
Figure 4-87
Step 3 In the
Pattern
box, enter the value for pattern.
Step 4 Click
Start
to perform the directions operations. You can also go to the PTZ Control
Panel to perform the operations of adjusting zoom, focus, iris, and directions.
Step 5 On the
PTZ
interface, click
End
to complete the settings.
4.4.3.4 Configuring AutoScan
Step 1 On the Expanded PTZ Control Panel, click
.
The
PTZ
interface is displayed.
Step 2 Click the
Border
tab.