Front Panel and Rear Panel 14
Icon
Name
Function
Power indicator
light
PWR
Power indicator light.
Channel indictor
light
1-32
For 4/8/16-channel series product.
The corresponding channel light becomes on
when system is recording.
For 32/64-channel series product:
When the light flashes slowly, it means the
corresponding channel of 1-16 channel is
recording now (Such as channel 1).
When the light flashes fast, it means the
corresponding channel of 17-32 channel is
recording now (Such as channel 17)
When the light becomes on, It means the
corresponding 2 channels are recoding now
(Such as channel 1 and channel 17.).
The channel indictor light here does not
show the status of the 33-64-channel.
IR Receiver
IR
It is to receive the signal from the remote
control.
2.1.11 NVR42V-8P Series
The front panel is shown as below. See Figure 2-13.
Figure 2-13
Table 2-11
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up
or shut down NVR.