Quick Start Guide
10
3.3.2
Installing SD Card (Optional)
SD card slot is available on select models.
Please disconnect the power from the device before installing the SD card.
Press the reset button for 10 seconds to reset the device.
Install SD card
Figure 3-5
3.3.3
Attaching Device
Make sure the mounting surface is strong enough to hold at least three times of the total
weight of device and bracket.
Connect the host grounding hole (
) to ground wire, which can improve device reliability
effectively. The ground hole is located next to the cable exit hole which is on the back of the
bottom cover; the specification of grounding screw is M2.5.