Dahua Technology DH-XVR1B04 User Manual Download Page 281

Page: 281 / 363

User’s Manual

269

status, total space and free space, and serial number of the HDD port.

Disk manager

Configuring the settings for the HDD manager.



HDD type setting: In the Properties list, select Read/Write, Read Only, and then click

Apply to save the settings.



HDD format: Select the HDD that you want to format, click Format, and enable Clear

HDD database in the pop-up message, click OK and enter the password of admin

user in the prompted dialog box, click OK and then following the on-screen
instructions to complete formatting.

Formatting HDD will erase all data on the disk, proceed with caution.

Note

Summary of Contents for DH-XVR1B04












































































































































































































































































































































































Search results

Summary of Contents for DH-XVR1B04

Reviews:

Related manuals for DH-XVR1B04

Brands by name

Popular brands

Dahua Technology DH-XVR1B04, User Manual

Search results

Summary of Contents for DH-XVR1B04

Reviews:

Related manuals for DH-XVR1B04

Brands by name

Popular brands