Dahua Technology DH-XVR1B04 User Manual Download Page 124

Page: 124 / 363

User’s Manual

112

The PTZ camera performs scanning according to the configured borders.

Click

again to stop auto scanning.

5.4.4.5

Calling Pan

On the expanded PTZ control panel, click

to start moving in horizontal direction.

Click

again to stop moving.

5.4.4.6

Using Auxiliary Button

On the expanded PTZ control panel, click

, the AUX setting interface is displayed.



In the Shortcut Aux list, select the option that corresponds to the applied protocol.



In the Aux No. box, enter the number that corresponds to the AUX switch on the decoder.

Auxiliary

5.4.5

Calling OSD Menu

For the coaxial camera, you can call the OSD menu through the expanded PTZ control panel.

On the expanded PTZ control panel, click

PTZ menu

Click Enter.

Summary of Contents for DH-XVR1B04












































































































































































































































































































































































Search results

Summary of Contents for DH-XVR1B04

Reviews:

Related manuals for DH-XVR1B04

Brands by name

Popular brands

Dahua Technology DH-XVR1B04, User Manual

Search results

Summary of Contents for DH-XVR1B04

Reviews:

Related manuals for DH-XVR1B04

Brands by name

Popular brands