2. Wrap each band around the pole and insert the end of each strap into the appropriate clamp.
3. Tighten each clamp so that each strap is taught against the pole.
4. Wrap several turns of Teflon tape around the threads of the PFA 110 Mount Adapter Block.
5. Screw the PFA 110 Mount Adapter Block into the internal thread of the PFB 300S Wall Mount
Bracket, until secure and then fix the set screw on the Wall Mount.
6. Pull the composite cable from the dome through the adapter block and pull it out of the other end
of the wall mount bracket.
7. Line up the hook at the top of the external enclosure to the inside hole of the adapter block and
then push it to the end, and then tighten the three M6 screws on the adapter block firmly. Note:
Ensure the M6 screws are tightly fixed to secure the dome to the wall mount.
8. Use four (4) hex screws and four (4) flat washers to secure the PFB 300S Wall Mount to the PFA
150 Pole Mount Adapter.
15