17
1
2
HOW TO ASSEMBLE: CHAMBER SET AND MAIN BODY
Assemble the chamber set and main body first and then plug the power cord with your dry hand.
USING POWER DIAL / WHEN SCREW STOPS IN USE
The screw may stop if you put ingredients too much or too quickly.
If the machine does not resume even after the following remedies, turn off the machine and contact
Dahlert Customer Center.
When the reverse motion comes to a complete stop, turn the power dial to the direction
of [ON] (clockwise) to run.
Turn the power dial to the direction of [REV] and hold it for 3~5 seconds (counterclock-
wise) and let it go. Repeat this 2-3 times.
When turning power dial to the direction of [ON] or [REV], make sure the screw comes to a complete stop
first before turning the dial to the direction of your choice.
The "Reverse" feature pushes the ingredients in the chamber upwards. The "Reverse" feature is active
when you are holding the dial and stops when you remove your hand.
Screw Stops in Use
Using Power Dial
①
Turn to up (clockwise) to 'Extract', set in the middle to 'Stop', and turn to down (counterclockwise) to 'Reverse'.
②
For safety, the machine will not stop instantly but slow down to a stop when you set the dial to Stop [ ].
③
Reverse [REV] feature is active when you are holding the dial on [REV]. (Stops when you remove your hand.)
4DC01742 사용설명서 DT-SJ-19(102-A2) 7개국어_V.00.indd 17
2019-08-13 오후 6:28:08
