6
Connecting the filtration system to the water installation
•
Connecting the filtration system to the water installation of the building must be carried out in accor-
dance with the standards applicable at the particular location. In case of any doubts, the installation
should be carried out by a qualified specialist.
•
Divide the flexible hose into two parts, which will be used to connect the system to the water system.
•
The filtration system is connected to the water installation with ¼” (6.3 mm) water hoses by inserting
the hoses into quick-release couplings in the head.
•
The places for connection of the water hoses are marked on the head with arrows that indicate the
water inlet and outlet.
•
Depending on the type and size of the cold drinking water connection, there are several me thods to
connect the inflow hose.
In order to connect the inflow hose, use one of the connection elements adjusted for ¼”
(6.3 mm) water hoses on the water intake.
Angular stop valve with a check valve, 3/8” thread and quick-release coupling for a 1/4” water hose
•
allows snapping the 1/4” water hose in the place of connection of the
flexible hose cold water faucet
•
protected against return outflow from the filter
•
the quick-release coupling makes connecting the 1/4” hose fast and
easy
•
Connection of the water hoses for filtered water must be carried out according to the manual of the
used water intake device.
Installation of the wall bracket
•
The wall bracket is installed with two
screws properly chosen for the type
of wall e.g., 3.5 Pz screws in case of a
furniture board. The bracket should be
installed in a way that provides eno ugh
space for the filter cartridge.
option 1
option 2
Connecting the filter head to the bracket
2.
Slightly deflect the opposite arm
of the bracket. Snap the head
by inserting the protruding
piece of the head into the hole.
3. Make sure that the head
is firmly positioned in the
bracket.
1.
Slip the connecting piece of the
head into the opening of the
bracket on the right side.
1.
2.
