background image

12

Technical specifications of the Flow Meter

Water flow rate

0,05-1,32 gal

Water flow measurement

1-99999 gallons

Power supply

2 AA alkaline batteries

Connection

1/4" BSP male

Working temperature

32-170

o

F

Working Pressure

Max. 112 psi

Weight

5.38 oz

Accuracy

+/- 5%

Length of electric cable to flow sensor

5 feet

Repeatability of the system

1 %

Low battery warning

When the battery capacity level is low, the Flow Meter generates an audible alarm, and a flashing empty 

battery symbol appears in the upper right corner of the LCD display. The alarm will be canceled when the 

batteries are replaced with new ones. Replacing the batteries does not cause the meter to lose status 

of the meter.

If the device, packaging, operating manual, etc. is marked with a symbol of a crossed wheeled wa-

ste bin, it means that it is subject to selective collection. The symbol of a crossed container on a 

device, packaging or manual informs that the electrical or elec tronic device, after its lifetime, must 

not be disposed with other household waste. It is forbidden to dispose of the device as mixed solid 

waste since it is classified as waste that can be harmful to the environment. The user is obligated 

to hand over the used device to a point of selective collection of electrical equipment and in accor-

dance with local regulations. Improper disposal of this product can be subject to penalties under 
domestic regulations of law.

Disposal of batteries

The product requires batteries described in the contents of Directive 2006/66/EC - 2XLR03 

(IEC), AAA (ANSI), which must not be disposed of with other household waste. Read the local 

regulations regarding disposal of batteries since their proper disposal prevents loss of health 

and pollution of the natural environment

Protection of the environment

The manufacturer has made all the effort to eliminate redundant packaging. The used packaging 

can be more or less divided into three groups: cardboard (box), polystyrene foam (side protective 

elements) and polyethylene (plastic bags, protective foil). The de vice was made from materials that 

can be recycled and reused by specialist facilities. Please read the regulations applicable in Poland 

and your local regulations within the scope of disposal of packaging, discharged batteries and used 

electronic devices

.

Instructions on disposal and environmental protection

Summary of Contents for Flow Comfort DC10 Lead

















Reviews: