Daewoo NUBIRA, User Manual

Page: 25 / 685

TECHNICAL SERVICE BULLETIN
TECHNICAL SERVICE BULLETIN
Description:
Reference:
Prod. Dates:
Bulletin No.:
Model(s):
Date:
VIN Range:
Group:
General Manager
Service Manager Technician(s)
Service Advisor Body Shop Manager
Parts Manager
Circulate To:
√
√
√ √
√ √
TSB-003-01
All
May 18, 2001
All
Remote Keyless Entry Transmitter
Programming
Body
N/A
All
Remote Keyless Entry Transmitter Programming Information
The Daewoo Remote Keyless Entry System allows for the use of as many as five (5)
transmitters for each vehicle. Replacement Remote Keyless Entry System Transmitters must
first be programmed to a specific vehicle using the Scan 100 Scan Tool. This process is
completed using serial data communication between the Scan 100 Scan Tool and the Remote
Keyless Entry Control Unit and is the only method available for programming Transmitters.
Note: All Transmitters for a specific vehicle must be programmed at the same time.
Once the programming function of the Remote Keyless Entry System is
activated, any Transmitter (existing or new) that is not programmed (or
reprogrammed) during the programming procedure will no longer operate the
Remote Keyless Entry System of that vehicle.
This Technical Service Bulletin provides information concerning the programming procedure
for the Remote Keyless Entry Transmitter(s).
REMOTE KEYLESS ENTRY TRANSMITTER PROGRAMMING PROCEDURE:
Note: Ensure that the doors, hood and trunk / rear hatch are closed prior to starting
the programming procedure.
1. Connect the Scan 100 Scan Tool to the Data Link Connector (DLC).
2. Turn the Scan 100 Scan Tool “ON” by pressing the “POWER” Button, then wait for the
MAIN MENU screen to be displayed.
3. From the MAIN MENU screen, select “Diagnostics” by pressing #1 on the Key Pad.
4. From the MODEL YEAR screen, select the appropriate model year of the specific vehicle
by either scrolling down to the year and pressing “ENTER”, or by pressing the respective
item number on the Key Pad.
5. From the VEHICLE TYPE screen, select the specific vehicle model by either scrolling
down to the model name and pressing “ENTER”, or by pressing the respective item
number on the Key Pad.
6. From the SYSTEM SELECTION MENU screen, select “Body” by pressing #2 on the Key
Pad.
7. From the BODY SELECTION MENU screen, select “Coding” by pressing #2 on the Key
Pad.