Daewoo KBE-6R2SMO, Service Manual

Page: 15 / 26

14
Bake Element Assembly Removal
ImPORTANT: the bake element wires must be properly labeled so that they can be connected to the same terminal when
the element is replaced. If the wires are not properly connected, the oven will not function properly.
ImPORTANT: When removing it from the oven, do not hold the bake element assembly by the wires. Damage to the bake
element terminals may result.
• Remove the oven door(s) as described on page 8.
• Remove the back cover.
• Replace the mounting screws that hold the bake element in place.
• If replacing the bake element, pull it up and out of the floor of the oven.
Label the wires that connect to the bake element terminals. When reconnecting the wires, make sure that the wires are
connected to the proper terminal.
• When reassembling the bake element in the floor of the oven, place the bake element inside the bake element frame and
place it over the top of the bake element in the floor of the oven.
• Hold the bake element frame in place with one hand while replacing the existing screws that hold it in place.
• Reinstall the oven door(s) as described on page 8.
• Test the oven to ensure that repairs were properly completed.
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 14 2014-07-18 오후 4:34:34