Daewoo KBE-6R2SMO, Service Manual

Page: 5 / 26

4
SECURINg ThE OvEN TO ThE CABINET
TOOLS
Most of the tools that you might need are shown below. Some are optional. the reason for the option is explained.
ELECTRICAL PLIERS or STRIPPERS and Door Removal : for cutting and stripping small electrical wire.
VOM (VOLT-OHM METER): for testing electrical circuits. If you do not have one, please get one. an inexpensive one will
suffice, as long as it has both "aC voltage" and "resistance" (i.e. rx1, rx10) settings on the dial. It will do for our purposes.
BUTT CONNECTORS, CRIMPERS, WIRE NUTS and ELECTRICAL TAPE: for splicing small wire. When splicing wire on
ovens, you must make sure you use high-temp connections, such as porcelain wire nuts, high-temp terminals and fiber-
glass insulated wire.
ALLIgATOR JUmPERS (sometimes called a "Cheater" or "Cheater WIre"): available at your local electronics store.
SCREW-DRIVERS: both flat and Phillips head; two or three sizes of each. It's best to have at least a stubby, 4- and 6-inch
sizes.
NUT-DRIVERS, WRENCHS: you will need a 1/4 to 1/2 inch size.
Screwdrivers:
flat
Phillips
nutdrivers:
electrician's
Diagonals
Pliers
575
595
595
560
600
850
50
80
250
100
570
600
560
NOTE : the number of a accessories included depends
on the particular appliance purchased.
1. fit oven into the cabinet recess.
2. open the oven door.
3. Secure the oven to the kitchen cabinet with two distance holders "a" which fit the holes in the
oven frame and fit the two wood screws "b".
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 4 2014-07-18 오후 4:34:21