background image

6

1) KBE-6R2SSS

5. CONTROL PANEL

Function knob

Remind button

Time button

Stop button

Start button

Temperature knob

Symbol

Function description

Pyrolytic

mode

oven Lamp : which enables the user to observe the progress of cooking without opening the door.

Pyroly

ti

c

mode

Deforst : the circulation of air at room temperature enables quicker thawing of frozen food (without 
heating). It's a gentle but quick way to speed up the defrosting time and thawing of ready-made dishes 

and cream filled produce etc.

Pyroly

ti

c

mode

bottom heat : a concealed element in the bottom of the oven provides a more concentrative heat to 
the base of food without browning. this is ideal for slow cooking dishes such as casseroles, stews, 
pastries and pizzas where a crispy base is desired.
the temperature can be set within the range of 60-120°C. the default temperature is 60°C.

Pyroly

ti

c

mode

Conventional : the top and bottom work together to provide conventional cooking.
the temperature can be set within the range of 50-250°C. the default temperature is 220°C.
this is optional function that can be work with rotisserie motor.

Pyroly

ti

c

mode

Conventional with fan : Combination of the fan and both heating element provides more even heat 
penetration, saving up to 30-40% of energy. Dishes are lightly browned on the outside and still moist 
on the inside.
note : this function is suitable for grilling or roasting big pieces of meat at a higher temperature.
the temperature can be set within the range of 50-250°C. the default temperature is 220°C.

Pyroly

ti

c

mode

radiant grill : the inner grill element switches on and off to maintain temperature.
the temperature can be set within the range of 180-240°C. the default temperature is 210°C.
this is optional function that can be work with rotisserie motor.

Pyroly

ti

c

mode

Double grill : the inside radiant element and top element are working.
the temperature can be set within the range of 180-240°C. the default temperature is 210°C.

Pyroly

ti

c

mode

Double grill with fan : the inside radiant element and top element are working with fan.
the temperature can be set within the range of 180-240°C. the default temperature is 210°C.
this is optional function that can be work with rotisserie motor .

Pyroly

ti

c

mode

Convection : an element around the convection fan provides an additional source of heat for 
convection cooking. In convenction mode the fan automatically comes on to improve air circulation 
within the oven and creates an even heat for cooking.
the temperature can be set within the range of 50-240°C. the default temperature is 180°C.

Pyrolytic

mode

Pyrolytic function : When the function set to prolytic mode, LeD display "Pya".
the default temperature is 450°C . the timer can be set 1:30 or 2:00 hours.

KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd   6

2014-07-18   오후 4:34:22

Summary of Contents for KBE-6R2SMO



























Reviews: