Daewoo FRS-20BD, Service Manual

Page: 39 / 102

38
NO DISASSEMBLING PROCEDURE NO DISASSEMBLING PROCEDURE
1 6
3 8
▷
Pull forward ice maker.
▷
Unscrew (3 points) Plate Gear Fixture.
▷
Unscrew Fixture of Frame Ice Maker.
▷
Check if ice dropping motor is normal (OK).
6-5. Ice Maker
1) Disassembling Procedure
2 7
▷
Remove 2 screws on top front of ice maker.
▷
Remove full ice sensing switch and level switch.
4 9
▷
Separate Ice Maker Assembly from
Frame Ice Maker.
▷
Remove 2 pin housing from Plate Gear Fixture.
5 10
▷
Separate Cover I/M (A) from Cover I/M (B)
with a (-) screw driver.
▷
Remove I-sensor (ice sensor) from
Case Icing As.
* Follow the reverse order when assembling.