Daewoo DWF-200AS, Service Manual

Page: 5 / 41

3. DIRECTIONS FOR INSTALLATION AND USE
4 DIRECTIONS
The openings must not
be obstructed by carpet-
ing when the washing
machine is installed on a
carpeted floor.
Installation Of The Noise Insulation Plate
How To Install On An Inclined Place
● The place where it would be exposed to
direct sunlight.
●
The place nearby a heater or heat appli-
ance.
● The place where it would be supposed
to be frozen in winter.
●
The kitchen with coal gas and a damp
place like a bathroom.
NOTES
10Cm
Install the washer on a horizontal
solid floor. If the washer is installed
on an unsuitable floor, it could make
considerable noise and vibration.
Installing Place
Never install in these places
2 Push the noise insulation plate
into the end, which decrease
the noise made by this washer.
1 The packing box
opened, there is a
noise insulation plate
at the bottom of the back
2 Check the Horizon
Status
Check the position of tub above
the center of the washer.
1 Horizon
Setting
After controlling the height
by turning the adjustable
leg, let the washer put
down to the ground.
Keep the machine body
more than 25cm apart from
the wall surface. It will
make easy cleaning the
drain filter which is equipped
at the back side of it. And if
it comes into contract vibra-
tion may occur.