Daewoo DR-C912B, Service Manual

Page: 27 / 132

25
DISASSEMBLY AND REPLACEMENT
3.12 DISASSEMBLY OF THE REEL TABLE,
IDLER PLATE TOTAL ASSÕY (FIG. 3.15)
a. Remove the POLY WASHER
!
and separate the IDLER
PLATE TOTAL Ass y
@
from the mainbase.
b. Remove the REEL TABLE
$
from the REEL TABLE POST
#
of the MAINBASE.
3.13 DISASSEMBLY OF THE REEL BRKT
TOTAL ASSÕY, CONNECT PLATE (FIG.
3.16)
a. Turn over the DECK MECHANISM and remove 2 screws
!
.
b. Remove the REEL BRKT TOTAL Ass y
@
from the MAIN-
BASE.
c. Separate the CONNECT PLATE
#
from the MAINBASE by
pushing to the direction of the arrow.
CAUTION:
¥ In diassembly of the REEL BRKT TOTAL ASS‘Y, take care
REEL BELT and REEL FELT not to be stained with
GREASE, OIL, or foreign substance.
¥ diassembly of the IDLER ASS‘Y should be precede the
diassembly of the REEL BRKT TOTAL ASSY.
¥ Check the operation of the REEL BRKT TOTAL ASSY
before assembly.
¥ Check the operation of FF/REW, PLAY, CUE, and REVIEW
work well and existence of noise during the mode opera-
tion..
FIg. 3.16 Disassembly of the REEL BRKT TOTAL ASS Y and the
CONNECT PLATE
CAUTION:
¥ Take care not to deform the IDLER PLATE TOTAL Ass y
@
when assembling and disassembling.
FIg. 3.15 Disassembly of the REEL TABLE and the IDLER PLATE
TOTAL ASS Y