Daewoo DR-C912B, Service Manual

Page: 30 / 132

28
MECHANICAL ADJUSTMENT
4. 3 MECHANICAL MODE (OPERATE WITH-
OUT A CASSETTE TAPE)
a. Remove the FRONT LOADING MECHANISM from the DECK
MECHANISM
b. Cap the IR LED and pull the FL RACK. This has the same effect
with cassette loading to the deck.
c. If the S,T POLE BASE is loaded, PLAY MODE starts auto-
matically. If you want other function, press the corresponding
button.
d. Turn off the poser when the Mechanism is in the desired posi-
tion.
4. 4 ADJUSTMENT OF THE POSITION OF
THE TENSION POLE (FIG. 4.6)
a. Place the MECHANICAL MODE in the PLAY MODE. Refer to
the above section 4.3 MECHANICAL MODE
b. Confirm that the TENSION LEVER is aligned with the datum
hole of the MAINBASE.
c. If the requirement b is not satisfied. turn the BAND BRAKE
ADJUST CAP clockwise or counterclockwise until the two datum
holes aligns with each other.
FIg. 4.6 Adjustment of the TENSION POLE POSITION