Daewoo DR-C912B, Service Manual

Page: 28 / 132

26
MECHANICAL ADJUSTMENT
4. 1 MECHANICAL ADJUSTMENT (FIG.
4.1~4.4)
In case of diassembly and reassembly for fixng the mecanical prob-
lem, check the following check point.
a. Make sure that the DATUM HOLE of the CAM GEAR is aligned
wth the DATUM HOLE in the MAINBASE in the EJECT modew
as shown in Fig. 4-1.
b. Make sure that the ending part A of the RELAY LEVER assem-
bled on the CONNECT PLATE is aligned with the reference
hole B of the MAINBASE as shown in Fig. 4.2.
c. The end point A of PINCH SPRINGPING of the LEVER
TOTAL ASS‘Y should be located within the trajectory B of the
CAM GEAR. (Fig. 4.3)
FIg. 4.1 Assembly reference between the FL RACK and the
CAM GEAR
TURN T
O
THE
END
ALIGN
FIg. 4.2 Assembly reference between the RELAY LEVER and the
CAM GEAR
FIg. 4.3 Assembly reference of the PINCH LEVER TOTAL
ASS Ywith the CAM GEAR