Daewoo DR-C912B, Service Manual

Page: 24 / 132

22
DISASSEMBLY AND REPLACEMENT
3. 4. DISASSEMBLY OF LOADING RACK,
LOADING ASSÕY, S/T SLANT POLE
ASSÕY(FIG. 3.6, 3.7)
a. Turn out the DECK MECHANISM and remove the LOADING
RACK
@
after unscrewing the SCREW .
b. Disintegrate the R LOADING AS
#
and L LOADING AS
$
.
c. Disintegrate the S SLANT POLE AS
%
and T SLANT POLE
AS
^
by moving those part in arrow dircetion.
3. 5. DISASSEMBLY OF THE A/C HEAD
ASSÕY (FIG. 3.8)
a. Remove the CONNECTOR
@
from the AC HEAD ASS‘Y,
Watch out that there is no damage in the HEAD connecting PIN.
b. Separate the AC HEAD ASS‘Y
!
after unscrewing thescrew
#
CAUTION:
¥ Take care GUIDE ROLLER of S/T SLANT POLE AS and
SLANT POLE not to be stained with grease during assembly.
¥ Refer to Fig. 3.7 in assembly.
FIg. 3.6 Disassembly of the LOADING RACK, LOADING ASS Y
and the SLANT POLE ASS Y
FIg. 3.7 Assembly of the L/R LOADING AS and the LOADING
RACK
CAUTION:
¥ After the assembly, adjust the tape transmissionsection by
refering to the chapter 5.
¥ After the adjustment of the tape transmission section, paint the
3 adjustment screw with locking paint.
FIg. 3.8 Disassembly of the AC HEAD ASS Y