Daewoo DR-C912B, Service Manual

Page: 25 / 132

23
DISASSEMBLY AND REPLACEMENT
3. 6. DISASSEMBLY OF THE LC BRKT
ASSÕY, PINCH LEVER TOTAL ASSÕY
(FIG. 3.9)
a. Separate the LC BRKT Ass y
@
after removing the 3 screws
!
.
b. Separate the LC BRKT Ass y
@
from the DECK MECHANISM.
c. Disintegrate the PINCH LEVER TOTAL Ass y
#
.
3. 7. DISASSEMBLY OF THE CAM GEAR,
RELAY LEVER, FL RACK (FIG. 3.9)
a. Separate the CAM GEAR
%
from the MAINBASE.
b. Separate the RELAY LEVER
^
from the MAINBASE.
c. Separate the FL RACK
&
from MAINBASE by moving to the
arrow direction.
CAUTION:
¥ After the assembly of the PINCH LEVER TOTAL Ass y, adjust
the tape transmission section by refering to the chapter 5.
¥ There should be no pollution on the surface of PINCH
ROLLER
$
with grease or other foreign material.
¥ Make sure if the end of the PINCH SPRINGPINCH A is
located at the end of trajectory of CAM GEAR B in assem-
bly (Refer to Fig. 4.3)
CAUTION:
¥ When reassembling, refer to Fig. 3.10, Fig. 3.11 and chapter 4.
FIg. 3.10 Assembly of the CAM GEAR, RELAY LEVER
FIg. 3.11 Assembly of the CAM GEAR, FL RACK
FIg. 3.9 Disassembly of the LC BRACKET ASS Y from the PINCH
LEVER TOTAL ASS Y