Figure 9
Figure 10
2.2 Insert pump-end connector of high pressure hose into aluminum exit and fasten the nut.
2.4 Turn the water supply on, making sure that the tap is fully open. See figure 5
WARNING:
The temperature of the incoming water must not exceed 40°C.
3. Use high pressure washer to wash objects
3.1 Connect the water supply and the power source, then turn on the power switch of the cleaner and
the gun trigger, as air has been exhausted, the cleaner is ready for operation.
O
I
O
I
RUNING WATER
INSERT INTO THE ALUMINUM CONNECTOR
GUN
8
EN
