EN
14. PROBLEMS SOLVING
• Before entrusting a repair department with the repair, please check the following points first.
Possible causes
Removal methods
Check the power plug to see if it is firmly
inserted in the socket.
Check the power socket to see if it is
powered.
Check the power switch of the vacuum
cleaner to see if it is turned on.
Ins
ert the plug in the socket again.
Make it sure that the power
socket is powered.
Turn on the switch.
Check the hose to see if they’ve been
blocked .
Check the bucket body to see if it is filled
with dust.
Check the upper cover to see if it is closed.
Check the filter to see if it is blocked.
Remove the blocking objects
timely.
Clear the dust off the bucket body.
Clean the filter.
The filter is too dirty or it is wet
The bucket body is
full of water
The water limiting ball has sealed the
suction inlet.
Clean the filter and dry it by airing
or take it off.
Empty the water from inside the
bucket.
• In case the power cord is damaged, because it needs special-purpose tools for its repairing, so it must
be replaced by the repair point appointed by the manufacturer, and users are kindly requested not to
replace it by themselves.
• Before cleaning and repairing the vacuum cleaner, it is necessary to pull the plug out of the power
socket.
In wet
absorbing,
the cleaner
refuses to
absorb water.
Absorbing
force is
weakened.
Motor
refuses
to rotate.
18
