7. TECHNICAL DATA
Power: 20 V
Running time: up to 40 min (base on 1.5Ah)
No-load speed: 1200 rpm
Blade material: SK5
Hedge trimmer cutting width: 200 mm
Teeth distance: 8 mm
Grass shear blade cutting width: 100 mm
Thickness of grass blade: 1.3 mm/1.5 mm (upper/lower)
Thickness of grass blade: 1.5 mm
Quick blade change system
Battery and charger not included
• The vibration emission level has been measured in accordance with a set of standardized criteria
and can be used to compare one power tool with another;
• The specified emission level can also be used to make an initial assessment of the exposure to
vibration.
Warning!
The vibration value changes according to the area of application of the electric equipment and may
exceed the specified value in exceptional circumstances.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Limit the operating time!
All stages of the operating cycle must be considered (for example, times in which the electric tools
are switched off and times in which the tool is switched on but operates without load).
Caution!
Residual risks
Even if you use this electric power tool in accordance with instructions, certain residual risks cannot
be rules out. The following hazards may arise in connection with the equipment’s construction and
layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period
or is not properly guided and maintained.
Danger!
EN
15
