GUARANTEE
WARRANTY DOES NOT COVER
Product model
Serial number
Username
Date of sale
Company
Client's signature
The warranty period starts from the date of sale of the products and covers 2 years for all power products.
During the warranty period, free failures caused due to the use of poor-quality materials in the production and
manufacturer workmanship admitted fault are removed. The guarantee comes into force only when warranty card
and cutting coupons are properly filled. The product is accepted for repair in its pure form and full completeness.
• Mechanical damage (cracks, chips, etc.) and damage
caused by exposure to aggressive media, foreign objects
inside the unit and air vents, as well as for damage
occurred as a result of improper storage (corrosion of metal
parts);
• Failures caused by overloading or product misuse, use of
the product for other purposes. A sure sign of overload
products is melting or discoloration of parts due to the high
temperature, simultaneous failure of two or more nodes,
teaser on the surfaces of the cylinder and the piston or
destruction of piston rings. Also, the warranty does not
cover failure of the automatic voltage regulator due to
incorrect operation;
• Failure caused by clogging of the fuel and cooling systems;
• Wearing parts (carbon brushes, belts, rubber seals, oil
seals, shock absorbers, springs, clutches, spark plugs,
mufflers, nozzles, pulleys, guide rollers, cables, recoil starter,
chucks, collets, removable batteries, filters and safety
elements, grease, removable devices, equipment, knives,
drills, etc.);
• Electrical cables with mechanical and thermal damage;
• Product opened or repaired by a non-authorized service center.
• Prevention, care products (cleaning, washing, lubrication,
etc.), installation and configuration of the product;
• Natural wear products (production share);
• Failures caused by using the product for the needs related
to business activities;
• If the warranty card is empty or missing seal (stamp) of the Seller;
• The absence of the holder's signature on the warranty card.
WARRANTY CARD
The product is in good conditions and fully complete. Read and agree the terms of the warranty.
Product
Model
Company
Date
of sale
Product
Model
Company
Date
of sale
To ensure that items are properly packaged and delivered when you send them to us, please con-
tact our customer service or the point of sale at which the equipment was purchased.
When shipping or disposing of batteries and cordless tools, always ensure that they are packed
individually in plastic bags to prevent short circuits and fires.
To ensure that the battery pack provides long service, you should take care to recharge it promptly.
You must recharge the battery pack when you notice that the performance of the device drops.
Never allow the battery pack to become fully discharged. This will cause it to develop a defect.
5.2 Battery capacity indicator (Fig. 4)
Press the button for the battery capacity indicator (Item B). The battery capacity indicator (Item A)
shows the charge status of the battery using 3 LEDs
All 3 LEDs are lit:
The battery is fully charged.
2 or 1 LED(s) are lit:
The battery has an adequate remaining charge.
1 LED blinks:
The battery is empty, recharge the battery.
Warning! Any foreign bodies must be completely cleared away from the area to be worked on.
Warning!
The switching devices installed on the tool by the manufacturer are not allowed to be removed or
bypassed, e.g. by fitting a switching button to the handle, as this may result in risk of injury and the
tool will no longer switch off automatically.
5. OPERATION
6.1 Using the equipment as grass shears
Allow the grass shears to glide over the ground. The best cutting performance is achieved on dry
lawns. The blade guard hood must be slid over the blade and the rechargeable battery removed
when the equipment is not being used. The grass shears is supplied ready assembled.
1. (Fig. 5) Push the battery into the battery mount provided (Fig. 2/Item 7)
until you hear the catch click into position. To take out the battery, press the push lock button (Item
C) and remove the battery.
2. (Fig. 5) Remove the blade guard hood (Item 6).
3. (Fig. 5) To switch on, push the safety lock-off forward (Item 3) and press the On/Off switch (Item
4) at the same time.
4. To switch off , let go of the On/Off switch.
6.2 Using the equipment as shrub shears
Hold the shrub shears slightly tilted in the direction of the shrub you wish to cut. Start by cutting the
sides of the shrub working from the bottom up, and finally cut the top of the shrub. The blade guard
