• Cordless grass and shrub shears
• Original operating instructions
• Safety instructions
3. PROPER USE
Grass shears:
The equipment is designed for cutting the edges of lawns and small areas of grass in private and
hobby gardens.
Shrub shears:
The equipment is designed for cutting small hedges and shrubs in private and hobby gardens.
Equipment designed for use in private and hobby gardens is regarded as unsuitable for use in
public facilities, parks and sports centers, along roadways, or in agriculture and forestry. The opera-
ting instructions as supplied by the manufacturer must be obeyed to ensure that the equipment is
used properly.
Warning! This equipment must not be used for composting purposes
(shredding) as this could result in injury or damage to property.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes
4. BEFORE STARTING THE EQUIPMENT
The equipment is supplied with battery and with a charger.
5.1 Charging the battery (Figure 3)
1. Take the battery pack out of the equipment. Press the push lock button (Fig. 4/ Item C).
2. Check that your mains voltage is the same as that marked on the rating plate of the battery char-
ger. Insert the power plug of the charger into the socket outlet. The green LED will light on.
3. Insert the battery pack onto the battery charger.
4. The red LED will light up until the battery is fully charged. The red LED turns green.
The battery pack can become a little warm during the charging. This is normal.
If the battery pack fails to charge, check:
• whether there is voltage at the socket outlet
• whether there is good contact at the charging contacts
If the battery pack still fails to charge, send
• the charging unit
• and the battery pack to our customer service center.
EN
17
shrub shear blade assy I
1
nut M4
4
E washer 4
Φ
16*
Φ
4.3*
Φ
1.5
4
range ring
4
upper shrub shear blade
1
limit ring for shrub shear blade
1
lower shrub shear blade
1
screw M4*10
4
shrub shear blade cover
1
right button of the blade cover
1
blade box bottom
1
left button of the blade cover
1
eccentric gear
1
blade box cap
1
self-tapping screw ST2.9*13
4
dust sponge with gum
1
grass shear blade assy II
1
right button of the blade cover
1
blade box bottom
1
left button of the blade cover
1
eccentric gear
1
blade box cap
1
self-tapping screw ST2.9*13
4
dust sponge with gum
1
upper grass shear blade
1
limit ring for grass shear blade
1
connector
1
lower grass shear blade
1
grass blade cover
1
main body Assy
1
self-tapping screw ST2.9*13
6
motor
1
gear box plate
1
screw M2.5*7
2
small gear
1
washer 5 12
Φ
X
Φ
5.2X1
1
linkage gear
1
bigger gear
1
spring for switch trigger
1
switch push button
1
components assembly
1
spring for switch trigger
1
switch button
1
self-tapping screw ST2.9*12
2
left housing base
1
left housing of socket
1
right housing of socket
1
right housing base
1
battery pack 2.0Ah
1
charger
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
9
10
11
12
13
14
15
16
17
18
19
20
33
34
35
36
14
21
22
23
24
26
27
28
29
30
31
32
25
37
39
38
