12
To ensure that items are properly packaged and delivered when you send them to us, please con-
tact our customer service or the point of sale at which the equipment was purchased.
When shipping or disposing of batteries and cordless tools, always ensure that they are packed
individually in plastic bags to prevent short circuits and fires.
To ensure that the battery pack provides long service, you should take care to recharge it promptly.
You must recharge the battery pack when you notice that the performance of the device drops.
Never allow the battery pack to become fully discharged. This will cause it to develop a defect.
5.2 Battery capacity indicator (Fig. 4)
Press the button for the battery capacity indicator (Item B). The battery capacity indicator (Item A)
shows the charge status of the battery using 3 LEDs
All 3 LEDs are lit:
The battery is fully charged.
2 or 1 LED(s) are lit:
The battery has an adequate remaining charge.
1 LED blinks:
The battery is empty, recharge the battery.
Warning! Any foreign bodies must be completely cleared away from the area to be worked on.
Warning!
The switching devices installed on the tool by the manufacturer are not allowed to be removed or
bypassed, e.g. by fitting a switching button to the handle, as this may result in risk of injury and the
tool will no longer switch off automatically.
5. OPERATION
6.1 Using the equipment as grass shears
Allow the grass shears to glide over the ground. The best cutting performance is achieved on dry
lawns. The blade guard hood must be slid over the blade and the rechargeable battery removed
when the equipment is not being used. The grass shears is supplied ready assembled.
1. (Fig. 5) Push the battery into the battery mount provided (Fig. 2/Item 7)
until you hear the catch click into position. To take out the battery, press the push lock button (Item
C) and remove the battery.
2. (Fig. 5) Remove the blade guard hood (Item 6).
3. (Fig. 5) To switch on, push the safety lock-off forward (Item 3) and press the On/Off switch (Item
4) at the same time.
4. To switch off , let go of the On/Off switch.
6.2 Using the equipment as shrub shears
Hold the shrub shears slightly tilted in the direction of the shrub you wish to cut. Start by cutting the
sides of the shrub working from the bottom up, and finally cut the top of the shrub. The blade guard
