background image

EN

EN

11

• Cordless grass and shrub shears 
• Original operating instructions 
• Safety instructions 

3. PROPER USE 

Grass shears:
The equipment is designed for cutting the edges of lawns and small areas of grass in private and 
hobby gardens. 

Shrub shears:
The equipment is designed for cutting small hedges and shrubs in private and hobby gardens. 
Equipment designed for use in private and hobby gardens is regarded as unsuitable for use in 
public facilities, parks and sports centers, along roadways, or in agriculture and forestry. The opera-
ting instructions as supplied by the manufacturer must be obeyed to ensure that the equipment is 
used properly. 
Warning! This equipment must not be used for composting purposes 
(shredding) as this could result in injury or damage to property.

The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of 
misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any 
kind caused as a result of this. 

Please note that our equipment has not been designed for use in commercial, trade or industrial 
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial 
businesses or for equivalent purposes

4. BEFORE STARTING THE EQUIPMENT 

The equipment is supplied with battery and with a charger. 

5.1 Charging the battery (Figure 3) 
1. Take the battery pack out of the equipment. Press the push lock button (Fig. 4/ Item C). 
2. Check that your mains voltage is the same as that marked on the rating plate of the battery char-
ger. Insert the power plug of the charger into the socket outlet. The green LED will light on. 
3. Insert the battery pack onto the battery charger. 
4. The red LED will light up until the battery is fully charged. The red LED turns green. 

The battery pack can become a little warm during the charging. This is normal. 

If the battery pack fails to charge, check: 
• whether there is voltage at the socket outlet 
• whether there is good contact at the charging contacts 

If the battery pack still fails to charge, send
• the charging unit 
• and the battery pack to our customer service center. 

Summary of Contents for DALGS18-1




















Reviews: