Operation Section
-62-
6.
Check to be sure that the LP-Gas warning plate is in
position on the lift truck, and is legible.
7.
Check to be sure the replacement tank is of the
correct type.
8.
Inspect the replacement tank for damage such as
dents, scrapes or gouges and for indication of
leakage at valves or threaded connections.
9.
Check for debris in the relief valve, for damage to
various valves and liquid level gauge.
10.
Inspect the quick-disconnect couplings for
deterioration, damage or missing flexible seals.
11.
Position the replacement tank so that the locating
pin (dowel) is in place.
WARNING
The LP-Gas tank must not extend past the
counterweight.
12.
Clamp the tank securely.
13.
Connect the fuel supply line.
14.
Open the fuel valve by slowly turning the valve
counterclockwise. If the fuel valve is opened too
quickly, a back pressure check valve will shut off the
fuel supply. If this happens, close the fuel valve
completely. Wait five seconds and then open the
fuel valve very slowly.
15.
Inspect the LP-Gas fuel lines and fittings with a
soap solution after filling the tank or when looking
for leaks.
Summary of Contents for D35S-2
