Safety Section
-19-
If Optional Suspension Seat (weight
adjusting type) Equipped
Seat Belt
The Operator Restraint System, Prevents the operator
from jumping from the operator’s compartment in the
event of a forward or side tipover. The system is
designed to keep the operator on the seat and in the
operator’s compartment in the event of a tipover.
Inspection
1.
If the seat belt is torn, if pulling motion is interrupted
during extension of the belt, or if the belt cannot be
inserted into the buckle properly, replace the seat
belt assembly.
2.
Belt Maintenance – Every 500 service hours. Check
that the belt fastening works properly and that
winding device is free from run lock when jerked.
Check that the belt is suitably fastened to the seat.
Check that the seat is correctly secured to the hood
and the chassis. On visual inspection, fastenings
must be intact, otherwise, contact the safety
manager.
WARNING
Your
DOOSAN
truck comes equipped with a
DOOSAN
operator restraint system. Should it
become necessary to replace the seat for any
reason, it should only be replaced with another
DOOSAN
operator restraint system.
Summary of Contents for D35S-2
