![background image](http://html1.mh-extra.com/html/daelim/et300-service/et300-service_service-manual_496917113.webp)
Check bearings on right and left crankcase.
Rotate each bearings inner ring with fingers.
Check if bearings can be turned in smooth and silent,
and also check if bearing outer ring is mounted on
gear tightly.
If bearing rotation is uneven, noising, or loose bearing
mounted, then replace it.
Special tool: Inner bearing puller
Bearing driver
11-6 Assembly Of Crankcase
Install wave washer into right crank bearing seat.
Install crank shaft on the right crankcase.
Align the position mark on the balance shaft drive
gear with that of balance shaft driven gear, and then
install balance shaft onto right crankcase.
Balance shaft bearings
Wave washer
Position mark
Summary of Contents for ET300 - SERVICE
Page 1: ...1 ET 300 Service Manual ...
Page 142: ...REAR BRAKE ...
Page 160: ......
Page 161: ...17 8 Wiring Diagram ...