![background image](http://html1.mh-extra.com/html/daelim/et300-service/et300-service_service-manual_496917054.webp)
6-6 Valve Stem Replacement
Heat up cylinder head to 100~150
℃
with heated
plate or toaster.
Caution
y
Do not let torch heat cylinder head directly.
Otherwise, the cylinder head may be deformed
as heating it.
y
Wear on a pair of glove to protect your hands
when operating.
Hold the cylinder head, and then press out old valve
guide from combustion chamber side.
Tool: Valve guide driver: 5.0 mm
Caution
y
Check if new valve guide is deformation after
pressed it in.
y
When pressing in the new valve guide, cylinder
head still have to be kept in 100~150
℃
.
Adjust the valve guide driver and let valve guide height is in 13 mm.
Press in new valve guide from rocker arm side.
Tool: Valve guide driver: 5.0 mm
Wait for the cylinder head cooling down to room
temperature, and then correct the new valve guide
with reamer.
Caution
y
Using cutting oil when correcting valve guide
with a reamer.
y
Turn the reamer in same direction when it be
inserted or rotated.
Correct valve seat, and clean up all metal residues from cylinder head.
Tool: Valve guide reamer: 5.0 mm
Valve guide driver
5.0mm
Valve guide driver
5.0 mm
Valve guide reamer 5.0 mm
Summary of Contents for ET300 - SERVICE
Page 1: ...1 ET 300 Service Manual ...
Page 142: ...REAR BRAKE ...
Page 160: ......
Page 161: ...17 8 Wiring Diagram ...