DAELIM BESDI 125 - SERVICE, Service Manual

Page: 63 / 193

7-1
7. LH. CRANKCASE COVER/KICK STARTER
/CONTINUOUSLY VARIABLE TRANSMISSION
SERVICE INFORMATION
GENERAL SAFETY
Do not allow oil to contact the drive belt or the pulley face. The transmission rate of driving force is reduced with oil
contact.
Do not operate starter motor while the LH. crank case cover is removed.
NOTE
Take precautions not to apply the grease oil to the movable drive face or weight roller.
SPECIFICATIONS
SERVICE INFORMATION 7-1
TROUBLE SHOOTING 7-1
LH. CRANKCASE COVER 7-2
KICK STARTER 7-3
ITEM STANDARD SERVICE LIMIT
MOVABLE DRIVE FACE BUSHING INNER DIAMETER 24.01-24.05mm 24.06mm
DRIVE FACE BOSS OUTER DIAMETER 23.960-23.974mm 23.94mm
DRIVE BELT WIDTH 20.0mm 19.0mm
WEIGHT ROLLER OUTER DIAMETER 18.0-18.10mm 17.9mm
CLUTCH OUTER INNER DIAMETER 125.0-125.2mm 120.50mm
DRIVEN FACE SPRING PLAY 97.85mm 163.7mm
DRIVEN FACE OUTER DIAMETER 33.965-33.985mm 33.94mm
DRIVEN FACE INNER DIAMETER 34.000-34.025mm 34.06mm
TROUBLE SHOOTING
Engine starts but motorcycle does not work.
Drive belt worn.
Ramp plate damaged.
Clutch shoe worn or damaged.
Movable driven face spring cut.
Engine stops, or the vehicle runs suddenly,
after starting.
Clutch shoe spring cut.
Vehicle unable to run at the maximum speed,
or lack of output
Drive belt worn.
Defective movable driven face spring.
Weight roller worn.
Pulley face contaminated.
DRIVE BELT 7-6
MOVABLE DRIVE FACE 7-8
DRIVEN PULLEY 7-11