12-1
12. FRONT WHEEL/FRONT FORK/STEERING
SERVICE INFORMATION
GENERAL SAFETY
CAUTION
Keep oil or brake fluid off the brake disk and pad because the contaminated brake disk and pad reduces the braking
performance. If contaminated, replace the pad with a new one, and clean the disk.
Use special tire levers and rim protectors to remove or assemble tires to protect the rim from being damaged.
This section describes how to remove and maintain front wheels, front fork and steering system. For information on the
front brake system, refer to section 10.
Place a jack underneath the engine to support the 2-wheeled vehicle.
SPECIFICATIONS
TORQUE VALUES
STEERING STEM NUT
7.0
m
STEERING TOP THREAD
0.25
m
BRAKE CALIPER BOLT
3.1
m
FRONT CUSHION BOLT
2.25
f
m
FRONT AXLE NUT
6.0
m
SERVICE INFORMATION
12-1
TROUBLE SHOOTING
12-2
STEERING HANDLE
12-3
FRONT WHEEL
12-5
FRONT FORK
12-8
STEERING STEM
12-10
RADIAL
AXIAL
ITEM
STANDARD VALUE
SERVICE LIMIT
AXLE SHAFT DEFLECTION
-
0.2mm
FRONT WHEEL WOBBLES
-
2.0mm
-
2.0mm
FRONT CUSHION SPRING FREE LENGTH
220
215
THICKNESS OF BRAKE DISK
3.5
2.5
INNER DIAMETER OF MASTER CYLINDER
11.000~11.043
11.055
OUTER DIAMETER OF MASTER CALIPER PISTON
10.957~10.984 10.945
OUTER DIAMETER OF BRAKE CALIPER PISTON 26.918~26.968 26.91
INNER DIAMETER OF BRAKE CALIPER CYLINDER
27.000~27.050
27.06
Summary of Contents for BESDI 125 - SERVICE
