Daedong DSC62, Manual

Page: 85 / 184

HARVESTING INSTRUCTION
7-
7
(1) Standard Position
(A) Lower
A D j U S T I N G T H E C U T T E R
BLADE HEIGHT
Set the cutter blade lower if you
want to lower the cutting height.
417O715A
The cutter blade should be
set on the standard position
to prevent clogging with
soil on a wet-land or near a
ditch.
•
CAUTION
(1) Slide Rail
(A) HIGH (B) LOW
ADjUSTING ELEVATOR RAKE
HEIGHT
1. Adjust the elevator rake height
to be lower than height of crop
ear when the ear is easy to sep-
arate. There are 4 different rake
heights.
2. Adjust the elevator rake height
to the higher position when har-
vesting tall or lodged crop.
417O716A
When assembling, correctly
assemble the pulling cover
to the chain slot and then
tighten the bolts. In order to
confirm that the assembly
is correct, slowly rotate the
cutting position to confirm
normal start; otherwise, the
handle of the pulling cover
and the harvesting position
may be damaged.
•
CAUTION
DSC62-영문판-7장.indd 9 2012-04-17 오후 4:56:21