Daedong DSC62 Manual Download Page 49

Page: 49 / 184

HOW TO USE METERS, GAUGES AND CONTROLLERS

accelerator lever

(1) Accelerator Lever

DSC 02114

417O411A

Power steering lever

(A) Lowering the reaping unit

(B) Turning left

(D) Raising the reaping unit

With this one lever, you can raise

or lower the reaping unit, turn the

combine, or perform them at the

same time.
1. Tilting the lever back or forth

raises or lowers the reaping

unit.

(A) Turning left

(B) Turn to the left slightly

(D) Turn to the right slightly

2. The moving direction of the

combine is controlled by tilting

the lever. You can change the

moving direction completely or

slightly to the left or right.

Slight turn- tilt it slightly to the

desired direction
Complete turn-tilt it completely

to the desired direction.

•
•

417O412A

417O413B

This lever is to control the engine

speed.

Slow

Fast

DSC62-영문판-4장.indd 9

2012-04-17 오후 4:55:00

Summary of Contents for DSC62

























































































































































































Search results

Summary of Contents for DSC62

Reviews:

Related manuals for DSC62

Brands by name

Popular brands

Daedong DSC62, Manual

Search results

Summary of Contents for DSC62

Reviews:

Related manuals for DSC62

Brands by name

Popular brands