1
6
English
I
nstallation
Instruction
s
Planning the
Mounting Location
Holding brackets and hardware are provided to support the hood so you can permanently anchor it
to the wall.
The illustrations below show the purpose of the holding brackets and the support behind the wall.
Bracket
attached to
wall
Bracket
slot (on
hood
back)
•
(If mounting the hood to brick or
masonry) Select anchors rated for the
hood’s weight.
•
Properly reinforce the mounting surface
to support the hood’s full weight.
DHD Models
Weight
30
53 lbs (24 kg)
36
57 lbs (26 kg)
48
77 lbs (35 kg)
Mounting
Block
Studs
•
If mounting the unit to drywall or a
plastered surface, install a reinforced
mounting block between the studs.
•
Attach screws directly to the studs and
cabinets if they align with the mounting
holes in the hood back/top.
Adjacent
cabinetry
Adjacent
cabinetry
