background image

 
MANU0140    Rev. 0     2/2019 

12

To enter a FlexRx refill code, wake up the controller from  
sleep mode and enter in the unlocking code. The controller  
will automatically prompt the user to enter a FlexRx code or  
you may tap the Prescription button          to begin. 
 
 
Tap the screen and enter the code provided to you by your  
doctor by pressing the up arrows. Press the Enter key 

  

once you have verified your code is entered correctly. The  
controller will then display the amount of exposures that  
have been uploaded and you can continue your normal  
treatments. 

 

Downloading Treatment History 

Your  doctor may  require  you  to  send  back  a treatment  history file  so they  can  monitor  your  progress. To  do 
this, insert a USB drive into the USB port on your unit. The controller will detect a USB drive has been inserted 
and will automatically prompt the user with a screen. Press the “Export Data” button then press the Enter key 

. Remove the USB drive from the unit and send the file to your doctor.  

 

Warranty Information 

All Daavlin phototherapy equipment (excluding lamps) is warranted to be free from defects in workmanship and 
material for a period of three (3) years from the date of installation in your home, under normal use and service.  
Daavlin will replace or repair any parts that appear to have been defective in material and/or workmanship and, for 
the  term  of  the  warranty,  shall  bear  all  costs  related  to  such  defect(s)  including  the  cost  of  parts,  labor  and 
shipping.  Daavlin may require that smaller units be sent back to the factory for repair. 
 
During  the  term  of  the  warranty,  Daavlin  will  arrange  for  a  qualified  service  technician  to  repair  or  replace  any 
defective  systems  or  components  as  covered  in  accordance  with  the  terms  and  conditions  of  this  warranty.  
However,  this  warranty  will  be  declared  null  and  void  if  non-qualified  technicians  perform  any  repair  or 
maintenance on the device unless prior written authorization has been obtained from Daavlin.  Even with Daavlin’s 
authorization, the company shall not be responsible or liable for 

any

 such work (in or out of warranty).   

 
In  the  event  that  warranty  service  is  required,  it  will  be  at  Daavlin’s  sole  discretion  whether  subcontractors  or 
Daavlin employed technicians will perform the required warranty service work. 
  
This warranty does not apply to any unit which has been used, repaired or altered outside the factory in any way 
so as to affect the design, or which has been subject to misuse negligence or accident, or operated in any way 
other  than  in  accordance  with  our  operating  instructions.    The  warranty  does  not  extend  to  repairs  made 
necessary by use of parts or accessories not recommended by the manufacturer.  This warranty does not cover 
damage in transit. 
 
Daavlin warrants its lamps for sixty (60) days against defects in material and workmanship and to operate at 
the time of initial installation in an electrical circuit having the correct characteristics for proper lamp operation.  
No warranty is made as to useful lamp life or as to reduction in ultraviolet output due to any cause. 

 
Daavlin may require the return of merchandise claimed to be defective for its examination and shall be the sole 
judge as to whether material is in fact defective under the terms of this warranty. 
 
Daavlin reserves the right to bill for travel time, expenses and service cost for requested "warranty" service trips 
which result in work not covered by the warranty.  This may include, but is not limited to, a tripped circuit breaker, 
an unplugged machine or a blown fuse. 
 

Summary of Contents for 7 Series














Reviews: