10
DAAB INTERFACE CARD DB409 INSTRUCTION MANUAL
10
Revision 7
Channel list, Frequency converter, F-channels
No.
Name
Range
Factory Setting
F001
Communication with frequency converter
0 - 1
1
0
Communication disabled
1
Communication activated
F002
Acceleration time from closed position
motor 1 and 2 (from 0-100Hz)
0.5-9.9 seconds
2.0
F003
Acceleration time in all movements except at
closed position motor 1 and 2 (from 0-100Hz)
0.5-9.9 seconds
4.0
F004
Acceleration time when P500 is set to 2 and the
input is activated, battery backup
5.0-12.0 seconds
7.0
F005
Retardation time with limit switch and change of
direction for motor 1 and 2 (from 100-0Hz)
0.5-9.9 seconds
4.0
F006
Retardation time with photocell and vehicle loops
for motor 1 and 2 (from 100-0Hz)
0.5-9.9 seconds
2.0
F008
Low-speed frequency for opening movement,
motor 1 and 2
5-20 Hz
5
F009
Low-speed frequency for closing movement,
motor 1 and 2
5-20 Hz
10
F012
Opening frequency / Opening speed for motor 1
21-99 Hz
50
F013
Closing frequency / Closing speed for motor 1
21-99 Hz
30
F014*
Number of degrees with low-speed frequency
before open position for motor 1
0-60 degrees
0
F015*
Number of degrees with low-speed frequency
before closed position for motor 1
0-60 degrees
0
F022
Opening frequency / Opening speed for motor 2
21-99 Hz
50
F023
Closing frequency / Closing speed for motor 2
21-99 Hz
30
F024*
Number of degrees with low-speed frequency
before open position for motor 2
0-60 degrees
0
F025*
Number of degrees with low-speed frequency
before closed position for motor 2
0-60 degrees
0
* = Shown only when L001 and/or L002 are set to 1 encoder or 4, hold-to-run without limit switch.
F-channels are shown only when C2020=4, frequency converter.
Summary of Contents for DB409
Page 12: ......
