DAAB INTERFACE CARD DB409 INSTRUCTION MANUAL
Revision 7
11
No.
Name
Range
Factory Setting
F030*
Choice of ratio for motor 1
0 - 9
0
0
Not selected, in this position the motor only rotates at 25Hz
1
MK with pulleys 40/71 (ratio 1318:1)
2
MK with pulleys 50/71 (ratio 1098:1)
3
MK with pulleys 71/71 (ratio 791:1)
4
MK with pulleys 100/71 (ratio 565:1)
5
MK with pulleys 125/71 (ratio 456:1)
6
MK with pulleys 140/71 (ratio 409:1)
7
MT (ratio 791:1)
8
M10 with pulleys 71/71, motor 1400 rev/min (ratio 2970:1)
9
M10 with pulleys 71/71, motor 2800 rev/min (ratio 1485:1)
F031*
Measured ratio motor 1. Only when F030=0.
0 - 9999
F040*
Choice of ratio for motor 2
0 - 9
0
0
Not selected, in this position the motor only rotates at 25Hz
1
MK with pulleys 40/71 (ratio 1318:1)
2
MK with pulleys 50/71 (ratio 1098:1)
3
MK with pulleys 71/71 (ratio 791:1)
4
MK with pulleys 100/71 (ratio 565:1)
5
MK with pulleys 125/71 (ratio 456:1)
6
MK with pulleys 140/71 (ratio 409:1)
7
MT (ratio 791:1)
8
M10 with pulleys 71/71, motor 1400 rev/min (ratio 2970:1)
9
M10 with pulleys 71/71, motor 2800 rev/min (ratio 1485:1)
F041*
Measured ratio motor 2. Only when F040=0
0-9999
* = Shown only when L001 and/or L002 are set to 1 encoder or 4, hold-to-run without limit switch.
F-channels are shown only when C2020=4, frequency converter.
Summary of Contents for DB409
Page 12: ......
