22
OPERATING LAUNCHER
CAUTION:
The RDL series Launcher is designed to
launch a dummy at a very high velocity and thus fires with
great force. Make sure all persons and dogs are com-
pletely clear of the flight path of the dummy at all times
when loaded. Always wear hearing and eye protection
when operating this unit. Do not launch indoors. Keep
out of reach of children at all times.
Launching the RDL
1. Make sure the Launcher is not cocked.
2. Place on firm level ground with Folding Legs out.
3. Loosen Launch Angle Knob, slide to adjust launch an-
gle to desired position, and tighten Knob.
4. Lift the Locking Lever and open the Dummy Launcher.
5. Place a D.T. approved .22 caliber power load into the
chamber. From this point on,
STAY CLEAR OF THE
DUMMY FLIGHT PATH.
6. Close the Dummy Launcher and lock into place with the
Locking Lever.
7. Slide a DT Launcher Dummy completely onto the
Launcher barrel.
8. Turn the Remote Receiver ON. Make sure the Motor
Arm is not touching the Ratcheting Safety Arm.
9. Pull the Ratcheting Cocking Lever all the way back.
The Ratcheting Safety Arm should keep it in place.
10. Step away from the launcher.
11. Be sure the correct Launcher is selected on the Selec-
tor Knob and press the “BIRD” button on your transmit-
ter. The Remote Receiver should lift the Ratcheting
Safety Arm to release the Ratcheting Cocking Lever.
CAUTION
- If the Power Load misfires,
do not reuse
Power Load.
Always properly dispose of misfires.
