16
INSTALLING/REMOVING REMOTE RECEIVER
WARNING - Do not remove/install Remote Receiver
while Launcher is loaded with a Power Load.
These directions are for removing the Remote Receiver
unit to replace battery or for replacing a Remote Receiver
unit on a Remote Launcher.
Removing Remote Receiver
1. Loosen Remote Receiver Mounting Wing Nuts.
2. Lift the Remote Receiver out from the Mounting Bracket
on the Launcher Base.
Installing Remote Receiver
1. Slide the Remote Receiver into Mounting Bracket on
the Launcher Base.
2. Line up screw holes on the Remote Receiver with the
Mounting Bracket.
3. Screw in Mounting Wing Nuts until Remote Receiver is
properly secured to the Mounting Bracket.
